You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Thanksgiving: Support will not be available Thursday November 28th through Sunday December 1st. We will re-open Monday December 2nd.

Showing articles from Version tag

[MaxColor] Check Firmware Version

Overview Knowing how to check the firmware version of your Just Add Power devices is required when planning to add or replace a device on an already established system. In order to perform most of these steps, you will need a static route active. Follow the link for Instructions on how to set one up on your netwo…

List of Firmware Versions for 2G and Hybrid Systems

Overview Just Add Power devices must be on the same firmware version in order to communicate with each other. The last version of 2G-only firmware is A5.3.1FC+4+ . 2GΩ/3G and 3G backwards compatibility begins at firmware A6.4.12 . Any firmware versions not listed below should be considered beta or unsupporte…

scroll to top icon