⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️
Ethernet Cable Requirements
Overview This article covers copper Ethernet connections between a network switch and the RJ45 network port of an Omega Series, Ultra Series, or MaxColor Series Encoder or Decoder. Use Cat5e or higher-rated cabling and verify that each device establishes a 1 Gbps (1000 Mbps) network link . These …
01-Oct-2026
Coaxial Cabling with Just Add Power
Overview Just Add Power Encoders and Decoders connect to the network through Ethernet. An Ethernet-to-coax bridge can carry network traffic over existing coaxial cable, but Just Add Power has not validated a coaxial conversion solution for Encoder or Decoder audio/video connections. Plan for Ethernet cabling: Do n…
01-Oct-2026
Connecting Multiple Decoders to One Switch Port
Overview Multiple Just Add Power Decoders can share one connection to the Just Add Power network through an unmanaged gigabit switch. This is useful when several displays are in one location and only one network run is available to that location. The Decoders share a single gigabit uplink. Their source switching be…
01-Oct-2026
