[AMP] [Standardized] RTI ID11 Endpoint Control
* Overview * Video Overview This video demonstrates controlling endpoint devices - sources and displays - in a Just Add Power system with RTI Integration Designer 11. Prior to performing the steps in this video, Just Add Power has been configured as a Standardized AMP system and all standard sources and displays …
12-Apr-2024
[AMP] [Standardized] RTI ID9 Endpoint Control
* Overview * Video Overview This video demonstrates controlling endpoint devices - sources and displays - in a Just Add Power system with RTI Integration Designer 9. Prior to performing the steps in this video, Just Add Power has been configured as a Standardized AMP system and all standard sources and displays h…
12-Apr-2024
[JADConfig] Elan g: Creating Endpoint Control Drivers
* Overview * Procedure Overview This article addresses how to create Generic devices in Elan to control endpoint functions of Just Add Power: * Video Wall * Tiling Transmitter Video, Audio, and Layout control * Warp Transmitter Rotate and Zoom control This article is still a work in progress. All details colle…
28-Nov-2022
Static Route: Configure a Network to Access a Just Add Power System
* Overview * Set Static Route on the Router * Set Default Gateway on the Control Processor * Set Local Route on a PC Overview After a Just Add Power system has been configured with AMP or JADConfig, a Static Route must be created before the control system will work. There are 3 common ways to give the Data Net…
31-Jul-2023
CEC over IP Control
Overview CEC - Consumer Electronics Control - is an HDMI feature designed to allow a single remote to control multiple devices by sending commands through the HDMI cable connecting the devices together. For example, the TV remote can be used to control the Blu-Ray player connected to it. CEC works well in a point…
26-Jun-2024
