* [Overview][1] * [Part 1: Room, Drivers, and Connections][2] * [Part 2: Agents and MultiDisplay Manager][3] * [Part 3: Programming Macros][4] * [Part 4: Refresh Navigators and Go!][5] * * * ## Overview The instructions in this article will use the MultiDisplay Manager to program an interface for the Tilin...
A Just Add Power Receiver keeps track of whether the connected display is powered on or off. Essentially, the Receiver is looking for an active HDMI connection to a display. Telnet into a Receiver and send this command: > _**cat /sys/devices/platform/display/monitor_info | grep "attached=y" -c**_ Responses: * 0 =...
* [Overview][1] * [Video][2] * * * ## Overview This video demonstrates adding and configuring drivers for RTI Integration Designer 9 to control a Just Add Power AMP Standardized System. Download [RTI AMP Standardized drivers here][3]. AMP - Advanced Matrix Programmer - is a software that configures 3G and MaxCo...
* [Overview][1] * [Video][2] * * * ## Overview This video demonstrates controlling a Just Add Power Video Wall in RTI Integration Designer 9. Prior to performing the steps in this video, Just Add Power has been configured as a Standardized AMP system and all standard sources and displays have [Matrix Control][3...
* [Overview][1] * [Video][2] * * * ## Overview This video demonstrates controlling endpoint devices - sources and displays - in a Just Add Power system with RTI Integration Designer 9. Prior to performing the steps in this video, Just Add Power has been configured as a Standardized AMP system and all standard s...
* [Overview][1] * [Video][2] * * * ## Overview This video demonstrates controlling a Just Add Power Tiling Transmitter in RTI Integration Designer 9. Prior to performing the steps in this video, Just Add Power has been configured as a Standardized AMP system and all standard sources and displays have [Matrix Co...