Video Guide - Setup a Video Wall with Control4 MultiDisplay Manager for AMP Standardized Systems
Overview This video demonstrates building a Video Wall interface in Control4 using the MultiDisplay Manager. (MultiDisplay Manager does not work on all Control4 OS interfaces.) Prior to performing the steps in this video, the Just Add Power system has been configured as a Standardized AMP system and all standard so…
06-May-2025
Video Guide - Setup a Tiler with Control4's MultiDisplay Manager for AMP Standardized Systems
Overview This video demonstrates building a Tiling interface in Control4 using the MultiDisplay Manager. (MultiDisplay Manager does not work on all Control4 OS interfaces.) Prior to performing the steps in this video, the Just Add Power system has been configured as a Standardized AMP system and all standard source…
06-May-2025
Video Guide - Setup Control4 Drivers for AMP Standardized Systems
Overview This video demonstrates importing and configuring drivers for Composer OS3 to control a Just Add Power Standardized System setup with AMP. Download Control4 AMP Standardized drivers here . AMP - Advanced Matrix Programmer - is a software that configures Omega, Ultra and MaxColor Series Just Add Power Enco…
06-May-2025
Download - Control4 Driver for AMP Alternate Systems
Overview Contracted by Just Add Power. Controls Omega, Ultra, and MaxColor Just Add Power devices setup by AMP Alternate . Requires Just Add Power justOS firmware B2.1.0 or greater (applied by AMP). Switching driver supports up to 64 inputs and 64 outputs. Also includes endpoint control driver and documentation…
12-May-2025
Instructions - SAVI Controls on Composer OS2 for JADConfig Systems
Notice The information in this article references a SAVI system running on OS2 versions of Composer (2.x.y). Please reach out to SAVI for updated information on how to implement newer systems. Overview SAVI - Simple Audio Video Interface - is a hardware interface add-on for Control4 systems that provides web inter…
12-May-2025
Download - Control4 Driver for AMP Standardized Systems
Overview This driver package is for Just Add Power Omega, Ultra, and MaxColor systems configured as a Standardized AMP system - through the Let's Go option. The included drivers provide Matrix Control, Endpoint Control, and Feature Control. * Matrix Control - switch any display to watch any source * Endpoint C…
12-May-2025
Instructions - Setup a Tiler with Control4's MultiDisplay Manager
Overview The instructions in this article will use Control4's MultiDisplay Manager to program an interface for either the UL-759A or MC-QX. Before beginning this article, it is expected that you have already: * Configured all Just Add Power devices * Configured the switching driver by connecting other sources an…
12-May-2025
Instructions - Setup Endpoint Control (RS232, IR, CEC) for Encoders & Decoders
Overview Control4 systems can use Just Add Power Encoders and Decoders as an extension cord to manage sources and displays through CEC, IR, or RS232. Control is done on an individual device basis, so you can have a mixture of CEC, IR, and RS232 control in the same system depending on the needs of the endpoint. …
12-May-2025
Instructions - Setup a Video Wall with Control4's MultiDisplay Manager
Overview The instructions in this article will use the MultiDisplay Manager to program an interface for a Just Add Power Standard Video Wall. Before beginning this article, it is expected that you have: * Configured all Just Add Power devices * Configured the switching driver by connecting other sources and disp…
12-May-2025
Download - Control4 Driver for JADConfig Systems
Overview This driver package provides Matrix Control, Endpoint Control, and Feature Control of a Just Add Power VLAN switching system configured with JADConfig . * Matrix Control - switch any display to watch any source * Endpoint Control - manage sources and displays with IR, RS232, or CEC * Feature Control - …
12-May-2025
