You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
You are viewing the article in preview mode. It is not live at the moment.
Support will be closed on Juneteenth: June 19th. Normal hours resume June 20th.

Showing articles from End Point tag

Setup a Static Route for an Established Just Add Power System

Overview After a Just Add Power system has been configured with AMP or JADConfig, a Static Route must be created before the control system will work. There are 3 common ways to give the Data Network access to Just Add Power: * Set a Static Route on the router to allow ALL devices on the Data Network to communi…

CEC over IP Control

Overview CEC - Consumer Electronics Control - is an HDMI feature designed to allow a single remote to control multiple devices by sending commands through the HDMI cable connecting the devices together. For example, the TV remote can be used to control the Blu-Ray player connected to it. CEC works well in a point…

scroll to top icon