Overview There are three ways to Factory Default a unit: * Via the webUI * Via telnet * Via a Debug Cable Just Add Power Factory Default IP Settings are: * IP Mode: Auto IP * IP Address: 169.254.x.x /16 * Default Gateway: None Other Factory Default settings vary based on the model and the firmware version. …
Overview There are three ways to Factory Default a unit: * Via the webUI * Via telnet * Via a Debug Cable Just Add Power Factory Default IP Settings are: * IP Mode: Auto IP * IP Address: 169.254.x.x /16 * Default Gateway: None Other Factory Default settings vary based on the model and the firmware version. …
Overview Just Add Power 2G Series devices can be reset to factory default settings using one of the following methods: * webUI * Telnet * Debug Cable Default IP Configuration After Factory Reset: * IP Mode: Auto IP * IP Address: 169.254.x.x /16 * Default Gateway: None Note: Other factory default settings…