You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
You are viewing the article in preview mode. It is not live at the moment.

⚠️  JADConfig will reach End of Support on January 1, 2027. View the official notice!   ⚠️

Showing articles from pause tag

How to Control the HDMI Out for Omega Ultra Series Decoders

Overview Some installations require a receiver to output a pitch-black screen or hold a frozen still-frame. The CLI commands below provide those functions and are intended to be sent to the Decoder (RX) via Telnet on port 23 . Requirements * Firmware: Version B (justOS) * Network Access: A static route …

Section: Omega & Ultra Series

Last Updated at

21-Jan-2026

Tags: Black Output pause resume Play still stop video disable video No output kill video video mute darken video black black screen

How to Control the HDMI Out of a Decoder (2G Series and 2G Legacy Mode)

Overview There are times when installations require a receiver-side pitch black output or a paused still-frame. Commands have been included below for such circumstances. These commands are best applied via telnet (port 23). Requirements * Firmware: Version A6.x.x or later * Static Route: See link for more in…

Section: 2G Legacy Mode

Last Updated at

02-Oct-2026

Tags: Black Output No Video pause resume Play still stop video disable video No output kill video video mute darken video black black screen