Roku Resolution Handshake Issue: This fixes an issue where the ROKU does not forget a previous EDID handshake. This command will take a Roku from Auto Detect Resolution to 1080p/60, without needing to see the device's picture. You need to know the current IP address of the Roku. After executing the steps, any capable ...
There are times when installations require a receiver-side pitch black output or a paused still-frame. Commands have been included below for such circumstances. These commands are best applied via telnet (port 23). ## Firmware versions 'A' Output black video on a RX: echo 2 > /sys/devices/platform/videoip/p...