How-To: IR Dongle V2
Overview The IR Dongle V2 - Flux Capacitor V2 - adds IR support to the Just Add Power 3G product line by converting the serial port into an IR blaster. Pronto, Global Cache, and Global Cache Compressed IR code formats are supported. * Baudrate is 115200-8n1 * RS232 Feedback * LED indicator * LED responds on s…
26-Jun-2024
Samsung TV IR Control
Overview These codes are known to work on Samsung TVs. All codes sent are in ASCII format. IR codes must be terminated with a Carriage Return in order to be sent through Just Add Power devices. Codes Command Code (Pronto) Channel Down 0000 006D 0000 0022 00AD 00AD 0016 0041 0016 0041 0016 0041 0016 001…
26-Jun-2024
[Endpoint Control] Control4 Endpoint Control (RS232, IR, CEC)
* Overview * Requirements * Setup RS232 * Setup IR * Setup CEC CEC Programming with Samsung Displays Overview Control4 systems can use Just Add Power Transmitters and Receivers as an extension cord to manage sources and displays through CEC, IR, or RS232. Control is done on an individual device basis, so…
12-Apr-2024
How-To: IR Dongle V1
Overview The IR Dongle V1 - Flux Capacitor V1 - adds IR support to the Just Add Power 2G and 3G product lines by converting the serial port into an IR blaster. Pronto and Global Cache IR code formats are both supported. * Baudrate is 9600-8n1 * No RS232 feedback (simulated feedback from shell script only) * No…
26-Jun-2024
Converting Pronto Hex into Global Cache Format
The Flux Capacitor IR Dongle (VBS-HDMI-IRD) is capable of accepting either raw Pronto Hex codes (sent as ASCII characters) or Global Cache formatted commands. While Pronto Hex codes are freely available and generally easier to work with due to their non-proprietary nature, they often contain a larger number of chara…
23-Apr-2018
Static Route: Configure a Network to Access a Just Add Power System
* Overview * Set Static Route on the Router * Set Default Gateway on the Control Processor * Set Local Route on a PC Overview After a Just Add Power system has been configured with AMP or JADConfig, a Static Route must be created before the control system will work. There are 3 common ways to give the Data Net…
31-Jul-2023
