AppleTV 4K Settings & EDID
Overview Apple TV devices expect specific video capabilities to be advertised by the display’s EDID. When connected through a Just Add Power system, the Apple TV reads the EDID from the Encoder . To ensure correct video output, the Encoder’s EDID settings must be configured according to the product series used:…
01-Dec-2025
2G Series: A6.5.9-LTS.v3
Release Date 2020-11-24 Download Download Firmware A6.5.9 Compatibility * A6.5.9-X firmware places devices into "2G Mode" by default * Unless running a system consisting of both 2G devices and Omega or Ultra Series devices, there is NO reason to use the LTS series of firmware * All A6.5.9-X firmware versio…
19-May-2026
CEC over IP Control
Overview CEC (Consumer Electronics Control) is an HDMI feature that allows devices to send control commands over the HDMI cable. In a simple point-to-point setup, this allows a TV remote to control a connected source device. CEC works reliably when a single source is connected to a single display. However, in a di…
20-Feb-2026
Download - JADConfig: Configure a 2G, Omega, or Ultra Series VLAN Switching System
Legacy For existing JADConfig systems only. Overview JADConfig is Windows-only software used to configure a managed Ethernet switch and Just Add Power devices into an HDMI switching matrix. The HDMI matrix operates over network infrastructure but remains isolated from the main data network; audio and vide…
13-Feb-2026
