Standard Video Wall Setup & Control for Ultra Series
Overview These instructions are for Just Add Power Ultra Series devices running firmware B2.x.x . For older firmware, see A6.x.x Standard Video Wall or B1.x.x Video Wall . A Standard Video Wall is a seamless rectangular grid of displays—same size, same orientation—each with its own Decoder (Receiver). A s…
14-Nov-2025
Setup a Static Route for an Established Just Add Power System
Overview After a Just Add Power system has been configured with AMP or JADConfig, a Static Route must be created before the control system will work. There are 3 common ways to give the Data Network access to Just Add Power: * Set a Static Route on the router to allow ALL devices on the Data Network to communi…
29-May-2025
CEC over IP Control
Overview CEC (Consumer Electronics Control) is an HDMI feature that allows devices to send control commands over the HDMI cable. In a simple point-to-point setup, this allows a TV remote to control a connected source device. CEC works reliably when a single source is connected to a single display. However, in a di…
20-Feb-2026
