⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️
2G Legacy Mode Firmware: L1.1.9.0
Overview Firmware L1.1.9.0 enables 2G Series devices and compatible Omega Series and Ultra Series devices to operate under the JPSW switching structure used by AMP 2G Legacy Mode. This is the first L Series firmware release and requires AMP 2.0.0 or later . L Series firmware is intended only for AMP 2G Legac…
02-Oct-2026
UL-759A Tiling Encoder Microcode Update
Contact Technical Support Before Updating This procedure requires specialized programming tools and updates two separate microprocessors. Contact the Just Add Power Technical Support team to confirm the required hardware and microcode files before beginning. Overview The UL-759A Tiling Encoder, formerly identified…
02-Sep-2026
How to Update Firmware on a Device (2G Series and 2G Legacy Mode)
Overview The firmware update method depends on how the system is configured: * AMP 2G Legacy Mode: Use AMP 2.0.0 or later to apply L Series firmware through its configuration workflow. * Established A Series systems: Use the A Series maintenance instructions below when the system is remaining on A Series firm…
06-Oct-2026
