[AMP] [Standardized] JADConfig Stack Conversion
Overview Advanced Matrix Programmer provides a path forward for all legacy installations configured using JADConfig in a stacked topology using two or more switches. This article covers the steps required to migrate from Stacking to Trunking, combining or replacing any existing legacy multi-switch models at the job…
24-Jun-2024
[AMP] [Standardized] IP Addressing
Overview AMP Vlan uses a unique IP Scheme for all Just Add Power devices being setup using the software. Class B: 172.27.0.0 mask 255.255.0.0 The specific subnet does not affect the system as long as 2 rules are followed: * Each Transmitter and Receiver need a unique IP address that does not overlap any existing…
24-Jun-2024
Choosing between Standardized and Alternate Configurations
* Overview * Comparison Overview Just Add Power built its reputation for outstanding performance on its design using VLANs, a closed network to distribute audio and video with zero detectable latency. For most installs, a Standardized Configuration using VLAN Switching is the best option for a Just Add Power AV…
18-Sep-2023
