Multi-Switch Considerations for JADConfig Systems
Multi-Switch Models JADConfig joins switches together using Stacking topology. This means that ALL switches in the stack must be the same manufacturer and same model number. If the Right Switch for a JADConfig system requires multiple switches, then one of these switch models should chosen: Note: All of the s…
29-May-2025
Choosing the Right Switch for AMP Standardized Systems
Overview Building a Standardized Configuration in AMP will fully configure the switches listed below and make them compatible with Just Add Power-provided drivers to support them. When planning a Standardized System (also known as a VLAN Switching System), one of the most important decisions is the managed gigabi…
17-Jun-2025
Setup a Static Route for an Established Just Add Power System
Overview After a Just Add Power system has been configured with AMP or JADConfig, a Static Route must be created before the control system will work. There are 3 common ways to give the Data Network access to Just Add Power: * Set a Static Route on the router to allow ALL devices on the Data Network to communi…
29-May-2025
Factory Default a Luxul Switch
* Overview * Configuration Default Via Button Press Via CLI Via Web Interface * Stack Default Via CLI Via Web Interface Overview A Luxul switch should be at default settings before JADConfig is run on it for the first time. If a non-JADConfig setup is present on the switch, it should be removed befo…
02-Feb-2023
Download - Control4 Driver for JADConfig Systems
Overview This driver package provides Matrix Control, Endpoint Control, and Feature Control of a Just Add Power VLAN switching system configured with JADConfig . * Matrix Control - switch any display to watch any source * Endpoint Control - manage sources and displays with IR, RS232, or CEC * Feature Control - …
12-May-2025
Choosing the Right Switch for JADConfig Systems
Overview JADConfig is no longer being updated. New systems should use AMP to configure systems, and should use the Choosing the Right Switch for AMP VLAN article to choose a switch. When planning an installation, one of the most important decisions is the managed gigabit Ethernet switch that is the center of th…
29-May-2025
Download - JADConfig: Configure a 2G, Omega, or Ultra Series VLAN Switching System
Overview JADConfig is a Windows-only software that will configure a managed Ethernet switch and Just Add Power devices into an HDMI switching matrix. The HDMI matrix uses network infrastructure, but is separate from the main data network; audio/video traffic will not interfere with data traffic. It is used to man…
06-May-2025
