⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️
Build a New System on an Existing Network with AMP Alternate Configuration
Overview Advanced Matrix Programmer (AMP) can configure a new Omega Series, Ultra Series, or MaxColor Series system on an existing managed network using Alternate Configuration . In an Alternate Configuration, AMP configures only the Just Add Power Encoders and Decoders. The Installer or network administrator is r…
18-Aug-2026
AppleTV 4K Settings & EDID
Overview Apple TV devices expect specific video capabilities to be advertised by the display’s EDID. When connected through a Just Add Power system, the Apple TV reads the EDID from the Encoder . To ensure correct video output, the Encoder’s EDID settings must be configured according to the product series used:…
09-Jul-2026
Download AMP and Configure an Omega, Ultra, and MaxColor Series System
Overview AMP (Advanced Matrix Programmer) configures Omega, Ultra, and MaxColor Series devices into an HDMI matrix switching system. It is the modern replacement for JADConfig and supports both standardized and custom (alternate) configurations. If you were previously using JADConfig for Omega or Ultra systems, yo…
28-Aug-2026
CEC over IP Control (Omega, Ultra, and MaxColor)
Overview CEC (Consumer Electronics Control) is an HDMI feature that allows devices to send control commands over the HDMI cable. In a simple point-to-point setup, this allows a TV remote to control a connected source device. CEC works well when a single source is connected directly to a single display. In an HDMI …
04-Aug-2026
