⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️
AppleTV 4K Settings & EDID
Overview Apple TV devices expect specific video capabilities to be advertised by the display’s EDID. When connected through a Just Add Power system, the Apple TV reads the EDID from the Encoder . To ensure correct video output, the Encoder’s EDID settings must be configured according to the product series used:…
09-Jul-2026
Download Advanced Matrix Programmer (AMP) (2G Legacy Mode, Omega, Ultra, and MaxColor Series)
Overview Advanced Matrix Programmer (AMP) configures Just Add Power Encoders and Decoders into an HDMI matrix switching system. It supports Omega Series, Ultra Series, and MaxColor Series systems through Standardized Configuration and Alternate Configuration. AMP 2.0.0 adds support for 2G Series systems through A…
10-Oct-2026
CEC over IP Control (Omega, Ultra, and MaxColor)
Overview CEC (Consumer Electronics Control) is an HDMI feature that allows devices to send control commands over the HDMI cable. In a simple point-to-point setup, this allows a TV remote to control a connected source device. CEC works well when a single source is connected directly to a single display. In an HDMI …
04-Aug-2026
Build a New System on an Existing Network with AMP Alternate Configuration
Overview Advanced Matrix Programmer (AMP) can configure a new Omega Series, Ultra Series, or MaxColor Series system on an existing managed network using Alternate Configuration . In an Alternate Configuration, AMP configures only the Just Add Power Encoders and Decoders. The Installer or network administrator is r…
18-Aug-2026
Supported Video Resolutions and Timings for Ultra Series Devices
Summary Ultra Series Devices are capable of the following maximum video settings: * Resolution: 4096 x 2160 * Refresh Rate: 30Hz @ 4K 60Hz @ 1080P 120Hz @ 720P * Color Depth: 12-bit * Color Space: 4:4:4 * HDR: HDR HDR10 HLG While the Ultra Series is capable of these individual maximum sett…
24-Sep-2025
