⚠️ JADConfig will reach End of Support on January 1, 2027. View the official notice! ⚠️
Multicast Switching Protocol
Overview Multicast Switching changes the multicast IP address—called a Channel —that a Decoder subscribes to, so it displays the selected Encoder . This enables fast, reliable source switching without rewiring or reconfiguring routes. Channel changes can be triggered by a control system, user interface, or API…
08-Jul-2026
How to Use Serial over IP (2G Series)
Legacy For existing 2G Series systems only. 2G Series hardware has reached End of Life. End of Life refers to product availability and does not, by itself, mean the product has reached End of Support. Overview Serial over IP allows a control system to send RS232 commands through a Just Add Power 2G Series system…
31-Jul-2026
CLI Settings for Omega & Ultra Series Devices
Overview This article applies to Omega Series and Ultra Series devices running justOS firmware version B1.0.0 or later. Startup settings modify how a device behaves after it boots. Unlike runtime commands, startup settings are stored in non-volatile memory and remain active after power cycles. Most startup setti…
22-Jun-2026
CEC over IP Control (Omega, Ultra, and MaxColor)
Overview CEC (Consumer Electronics Control) is an HDMI feature that allows devices to send control commands over the HDMI cable. In a simple point-to-point setup, this allows a TV remote to control a connected source device. CEC works well when a single source is connected directly to a single display. In an HDMI …
04-Aug-2026
