⚠ JADConfig will reach End of Support on January 1, 2027. View the official notice ⚠
How to Configure Decoder Scaler Settings (Omega, Ultra, and MaxColor Series)
Overview Omega Series, Ultra Series, and MaxColor Series Decoders include a built-in video scaler. The scaler allows each Decoder to adjust its HDMI output resolution to match the requirements of its connected display. This is useful when displays with different resolution capabilities are used in the same system. …
31-Jul-2026
How to Use Image Pull
Overview Image Pull provides a preview of the HDMI video being processed by a Just Add Power Encoder or Decoder. The preview can be viewed in the device webUI, opened directly in a web browser, or displayed within a control system interface. Image Pull is also a useful troubleshooting tool. Comparing the preview fr…
17-Jul-2026
How to Modify Encoder EDID (Omega, Ultra, and MaxColor Series)
Overview By default, Omega, Ultra, and MaxColor Series Encoders request the maximum supported audio and video formats available for the connected source device. While this behavior is suitable for most installations, certain scenarios may require alternative configurations, such as specific resolutions, color spaces…
10-Jun-2026
Ultra Series Encoder Comparison
Overview Ultra Series Encoders connect source devices to an Ultra Series Just Add Power system. All models provide the core video distribution capabilities of the Ultra Series, but their available connections, audio features, power options, and form factors vary. Use the comparison tables below to select the approp…
15-Jul-2026
Just Add Power System Takeover Guide: Identification, Inventory, and Documentation
Overview When servicing an unfamiliar Just Add Power installation, the original system documentation may be unavailable, incomplete, or no longer reflect the equipment currently installed. Before making changes, gather information about the system hardware, switch connections, network settings, firmware, and control…
22-Jul-2026
AppleTV 4K Settings & EDID
Overview Apple TV devices expect specific video capabilities to be advertised by the display’s EDID. When connected through a Just Add Power system, the Apple TV reads the EDID from the Encoder . To ensure correct video output, the Encoder’s EDID settings must be configured according to the product series used:…
09-Jul-2026
Download AMP and Configure an Omega, Ultra, and MaxColor Series System
Overview AMP (Advanced Matrix Programmer) configures Omega, Ultra, and MaxColor Series devices into an HDMI matrix switching system. It is the modern replacement for JADConfig and supports both standardized and custom (alternate) configurations. If you were previously using JADConfig for Omega or Ultra systems, yo…
09-Jun-2026
CEC over IP Control (Omega, Ultra, and MaxColor)
Overview CEC (Consumer Electronics Control) is an HDMI feature that allows devices to send control commands over the HDMI cable. In a simple point-to-point setup, this allows a TV remote to control a connected source device. CEC works well when a single source is connected directly to a single display. In an HDMI …
04-Aug-2026
